What are the main 5G frequency bands in the US, and why does it matter
본문
You have probably noticed a gray box or a slim canister bolted to a light pole near your home or office. That is likely a small cell, and it is part of how 5G works in the United States. To understand why they keep showing up, it helps to know a little about the radio frequencies that 5G uses.
Mobile carriers in the US run their 5G networks on three broad bands of the radio spectrum. The low band sits between about 600 MHz and 1 GHz. The mid band runs roughly from 1 GHz to 6 GHz. The high band, often called millimeter wave, goes from about 24 GHz up to 47 GHz.
These bands behave very differently. Low-band signals travel long distances and pass through walls, trees and buildings without much trouble. That is the kind of signal that covers whole suburbs from a single tower. But it does not carry huge amounts of data. Mid-band is a compromise. It goes a decent distance and still gets through most walls, but it can move much more data than low band. That is the sweet spot for the faster speeds that 5G advertises.
High-band millimeter wave is a different story entirely. It carries enormous amounts of data, which is why it can deliver the fastest advertised 5G speeds. But it does not travel far. A millimeter wave signal can be blocked by a single tree, a thick window or even heavy rain. It needs a clear, short path to your phone.
That is why carriers install so many small cells. A traditional cell tower covers several miles. A small cell on a streetlight pole covers a few blocks. In the high band, you might need one every few hundred feet to keep a connection alive. That is why you see them going up in dense downtown areas, stadiums and busy shopping streets, places where many people need a lot of data at once.
Local governments have some control over where small cells go, but not as much as many residents think. Under a federal law, a city cannot reject a small cell because of concerns about radio frequency exposure, as long as the equipment meets the FCC's limits. Cities can still set rules about where the poles sit, what they look like and how much the permit costs, within certain deadlines and restrictions from the FCC.
Published measurements taken at street level near 5G sites typically show readings well within the safety limits set by the FCC and international guidelines. That is at ground level. Right in front of the antennas, on a rooftop for example, the readings can be much higher. That is why access to those areas is usually restricted.
If you want to know about a specific small cell in your neighborhood, the place to start is your city's permit records. If you have questions about possible health effects, those are best asked to a doctor. Questions about the legal process belong with a lawyer. Questions about the equipment belong with the carrier or the FCC.
A closer look is at 5G frequency bands explained.
댓글목록0
댓글 포인트 안내